How To Fix A Blocked Toilet Full Of Water In Cumbria

Are you struggling with a blocked toilet full of water in Cumbria? Don't worry, you are not alone. Blocked toilets are a common household problem that can be frustrating to deal with. However, if you follow the steps outlined below, you can fix the blocked toilet easily and quickly.

Introduction

Drainage Cumbria is a blocked toilets company in Cumbria. We understand the challenges that come with blocked toilets and are here to help. Our team of experts has years of experience in dealing with blocked toilets and can provide you with efficient and reliable solutions.

In this article, we will guide you on how to fix a blocked toilet full of water in Cumbria. We will cover everything from identifying the cause of the blockage to fixing it using a plunger, an auger, or other methods.

Identifying the cause of the blockage

Before you can fix a blocked toilet, you need to identify the cause of the blockage. There are several reasons why a toilet may become blocked, including:

• Flushing inappropriate items down the toilet, such as baby wipes, sanitary products, or paper towels.
• Accumulation of toilet paper in the drain.
• Tree roots growing into the pipe.
• Pipe collapse or damage.
• Sewer line backups.

Once you have identified the cause of the blockage, you can proceed to fix it.

Using a plunger

A plunger is the most common and effective tool for fixing a blocked toilet. It creates suction that dislodges the blockage and allows the water to flow freely. Follow these steps to use a plunger:

1. Put on rubber gloves to protect your hands.
2. Position the plunger over the blocked toilet bowl.
3. Create a seal by pressing down on the plunger firmly, ensuring the plunger cup covers the entire drain hole.
4. Push and pull the plunger up and down vigorously for about 20 seconds.
5. Release the plunger and check if the water is draining. If it is still blocked, repeat the process until the blockage clears.

Using an auger

If the plunger does not work, you can try using an auger. An auger is a tool that is used to break up or remove blockages that are deeper in the toilet's plumbing. Follow these steps to use an auger:

1. Put on rubber gloves to protect your hands.
2. Insert the end of the auger into the drain hole in the toilet bowl.
3. Turn the handle of the auger clockwise to feed the cable into the drain until you feel resistance.
4. Continue turning the handle while applying pressure until the auger goes through the blockage.
5. Spin the auger in a full circle to break up any remaining blockages.
6. Pull the auger out of the drain.
7. Flush the toilet to check if the blockage has cleared.

Other methods

If both the plunger and auger methods do not work, you can try the following methods:

• Pour hot water into the toilet bowl. The hot water can help break down any blockages that may be causing the problem. Ensure that the water is not boiling, as it can crack the toilet bowl.
• Use a chemical drain cleaner. Drain cleaners can dissolve blockages that are made of organic materials. Be careful not to use too much, as it can corrode the toilet bowl and pipes.
• Call a professional plumbing service. If all methods fail, it may be best to call a professional plumber to fix the blocked toilet. They have the expertise and tools necessary to solve the problem safely and efficiently.

Conclusion

In conclusion, fixing a blocked toilet full of water in Cumbria can be a daunting task. However, with the right tools and techniques, you can tackle the problem quickly and easily. Drainage Cumbria is here to help you with all your blocked toilet problems. If you have any questions or need professional assistance, do not hesitate to contact us. Give us a call at 01228 734162, and we will be happy to assist you.